Agriprom Manure Separator Pro-6 series / Pro-10 Series

The Agriprom slurry separator meets even the highest requirements, manufactured in full stainless steel design with high durability of all parts in contact with slurry. The Separator Pro-6 Series is providing a high throughput at a low energy demand (1.5kW).

How it works
The liquids which are going to be separated are pumped in at the back of the machine. Using the AG2 pump a homogenous slurry is provided as the integrated chopping facility of the pump and its outstanding ability to do the agitation and pumping at the same time makes for perfect pre-conditioning of the slurry. The raw slurry flows onto the rotating stainless screen drum, the liquid fraction runs down into a collecting tray and s discharged to the side of the machine. An overflow prevents overfilling, no readjustments to the input pump are needed (e.g. to compensate an unsteady flow while the level in the pit is going down). The suspended fibrous materials and other solids get “squeezed out” in two steps in between the rubber coated compression rollers and the screen drum. At the front of the machine the rollers and the separated dry matter gets scraped off by a synthetic scraper from the rotating screen and slides down on the front chute.

Specifications
Motor nominal power: 1.5 kW
Operating voltage: 230 2-, 50 Hz, 400 3-, 50 Hz
Inlet spigot: Square flange 180x180
Spigot for outflow of liquid: 110 mm
Spigot for overflow/return: 160 mm
Drive: Chain drive with gear reducer
Compression rollers: Designed with a flexible core and hard wearing rubber coating. Rollers are spring-load mounted on a lever arm.
Throughput: 4-40 m3/h (cow manure 20-25m3/h)
Dry matter content: up to 30%, stackable

Specifications for separation are empirical values at common application parameters with reservation and depending on the input of raw material.

Advantages